BLOTTING PAPER
FOR AIRTIGHT JOINTS. Blotting paper is an excellent material for making an airtight joint when bolting a carburetter on to its flange. As it is very soft and compressible. it beds down well into any irregularities in the surface, and will work fairly well even if used dry. It is better, however, to coat each side with gold size or shellac varnish. To cut the washer to the right size the well known method of placing a sheet over the flange and tapping the outline with a hammer is the best.
Permanent link to this item
Hononga pūmau ki tēnei tūemi
https://paperspast.natlib.govt.nz/newspapers/RMPOST19320726.2.3.4
Bibliographic details
Ngā taipitopito pukapuka
Rotorua Morning Post, Volume 2, Issue 284, 26 July 1932, Page 2
Word count
Tapeke kupu
93BLOTTING PAPER Rotorua Morning Post, Volume 2, Issue 284, 26 July 1932, Page 2
Using this item
Te whakamahi i tēnei tūemi
NZME is the copyright owner for the Rotorua Morning Post. You can reproduce in-copyright material from this newspaper for non-commercial use under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International licence (CC BY-NC-SA 4.0). This newspaper is not available for commercial use without the consent of NZME. For advice on reproduction of out-of-copyright material from this newspaper, please refer to the Copyright guide.
Log in