STARTER SWITCH CONTACTS
The contacts of the electric starter switch should be periodically examined as they are liable to become pitted through the sparking which takes place each time the circuit is broken w'hen using the starter. Emery cloth may be used to clean up the contact surfaces. The tw’O set screws, mounted at each side of the flange, should be removed to allow inspection to be made, and'the tension of the plunger spring may be tested at the same time to ensure the contacts are clear each time the plunger is brought out of action.
Permanent link to this item
https://paperspast.natlib.govt.nz/newspapers/SUNAK19280403.2.47.26
Bibliographic details
Sun (Auckland), Volume II, Issue 320, 3 April 1928, Page 8
Word Count
96STARTER SWITCH CONTACTS Sun (Auckland), Volume II, Issue 320, 3 April 1928, Page 8
Using This Item
Stuff Ltd is the copyright owner for the Sun (Auckland). You can reproduce in-copyright material from this newspaper for non-commercial use under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International licence (CC BY-NC-SA 4.0). This newspaper is not available for commercial use without the consent of Stuff Ltd. For advice on reproduction of out-of-copyright material from this newspaper, please refer to the Copyright guide.
Log in