THE HARDEST ALLOY.
Tungsten carbide, consisting of carbon and tungsten approximately in proportions of 95 per cent, tungsten and 5 per cent carbon, is the hardest alloy known. It was made on a laboratory scale in 1915, but though of interest to metallurgists it was so extremely brittle that it had no practical usefulness. Improved methods of working, and in some cases the addition of cobalt, with or without a minute quantity of iron, have now given tungsten carbide a tenacity that enables it to be used for tipping cut- | ting tools. The results obtained are I remarkable. In an automatic chucking machine in which tungsten carbide tools had been substituted for j those of high-speed steel it was found j possible tb machine 27,000 bronze V valve discs, whereas with the-.- finest j quality of high-speed steel regrinding | was necessary after 600 pieces had been machined. The finishing operaj tion was carried out with tungsten j carbide, tools, and after producing \ 28,000 parts their cutting edges showed no preceptible signs of breaking
down. / Tungsten carbide is 250 times as hard as lead, 20 times as hard as decarburised iron, and about 2 3-5 times as hard as hardened 0.4 C. steel.
Permanent link to this item
https://paperspast.natlib.govt.nz/newspapers/PUP19291224.2.5
Bibliographic details
Putaruru Press, Volume VII, Issue 320, 24 December 1929, Page 2
Word Count
202THE HARDEST ALLOY. Putaruru Press, Volume VII, Issue 320, 24 December 1929, Page 2
Using This Item
Stuff Ltd is the copyright owner for the Putaruru Press. You can reproduce in-copyright material from this newspaper for non-commercial use under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International licence (CC BY-NC-SA 4.0). This newspaper is not available for commercial use without the consent of Stuff Ltd. For advice on reproduction of out-of-copyright material from this newspaper, please refer to the Copyright guide.
Log in