ABOUT AERIALS
No wireles enginer thinks of using anything but high conductivity wire for aerials. The lead to the earth should be short,, made of aerial wire, and with a low-resistance connexion to the earthing system. If you are using a water-pipe earth try to make connexion with the rising main. When an earth clip is used in conjunction with a water-pipe all paint, etc., must be scraped off the pipe where the joint is to be made.
Permanent link to this item
https://paperspast.natlib.govt.nz/newspapers/HBTRIB19291009.2.76
Bibliographic details
Hawke's Bay Tribune, Volume XIX, Issue 250, 9 October 1929, Page 9
Word Count
78ABOUT AERIALS Hawke's Bay Tribune, Volume XIX, Issue 250, 9 October 1929, Page 9
Using This Item
NZME is the copyright owner for the Hawke's Bay Tribune. You can reproduce in-copyright material from this newspaper for non-commercial use under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International licence (CC BY-NC-SA 4.0). This newspaper is not available for commercial use without the consent of NZME. For advice on reproduction of out-of-copyright material from this newspaper, please refer to the Copyright guide.
Log in